Unverified Commit 2797474b authored by Paweł Spychalski's avatar Paweł Spychalski Committed by GitHub
Browse files

Merge pull request #1233 from iNavFlight/avs-small-text-changes

Minor text improvements
parents c46a52ae 412d8a6b
......@@ -1129,7 +1129,7 @@
},
"receiverHelp": {
"message": "Please read receiver chapter of the documentation. Configure serial port (if required), receiver mode (serial/ppm/pwm), provider (for serial receivers), bind receiver, set channel map, configure channel endpoints/range on TX so that all channels go from ~1000 to ~2000. Set midpoint (default 1500), trim channels to 1500, configure stick deadband, verify behaviour when TX is off or out of range.<br /><span style=\"color: red\">IMPORTANT:</span> Before flying read failsafe chapter of documentation and configure failsafe."
"message": "Please read receiver chapter of the documentation. Configure serial port (if required), receiver mode (serial/ppm/pwm), provider (for serial receivers), bind receiver, set channel map, configure channel endpoints/range on TX so that all channels go from ~1000 to ~2000. Set midpoint (default 1500), trim channels to 1500, configure stick deadband, verify behaviour when TX is off or out of range. Make sure that the channel values all increase when you push the sticks up and to the right. If not, reverse the channel in the TX. Do not apply any other mixing in the TX.<br /><span style=\"color: red\">IMPORTANT:</span> Before flying read failsafe chapter of documentation and configure failsafe."
},
"receiverThrottleMid": {
"message": "Throttle MID"
......@@ -2462,7 +2462,7 @@
"message": "Horizontal speed GPS weight"
},
"positionEstimatorConfigurationDisclaimer": {
"message": "This value should be changed very carefully. In most cases there is not need to change that. For advanced users only!"
"message": "These values should be changed very carefully. In most cases there is no need to change them. For advanced users only!"
},
"gps_min_sats": {
"message": "Min. GPS satellites for a valid fix"
......@@ -3689,7 +3689,7 @@
"message": "Current Meter Type"
},
"rollPitchAdjustmentsMoved": {
"message": "Roll & Pitch board orientation is available only in the CLI. Do not use it to trim the airplane for the level flight! Use <strong>fw_level_pitch_trim</strong> instead"
"message": "Roll & Pitch board orientation is available only in the CLI. Do not use it to trim the airplane for the level flight! Use Fixed Wing Level Trim on the PID tuning tab under Mechanics instead (<strong>fw_level_pitch_trim</strong>)."
},
"pidId": {
"message": "#"
......
Markdown is supported
0% or .
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment