Commit 196a0f73 authored by Michael Jakob's avatar Michael Jakob
Browse files

Fix documentation links

parent e3e55c64
......@@ -25,7 +25,7 @@ Here are the hardware specifications:
set serialrx_provider = 1 (0 for 1024bit, 1 for 2048bit)
set spektrum_sat_bind = 5
For more detail of the different bind modes please refer the Spektrum bind.md document
For more detail of the different bind modes please refer the [Spektrum Bind](Spektrum bind.md) document
Deltang receivers in serial mode will work like any other Spektrum satellite receiver (10bit, 22ms) only the bind process will be different.
......@@ -35,4 +35,4 @@ The pin layout for the ALIENWIIF1 is very similar to NAZE32 or the related clone
The AlienWii32 F1 board can be flashed like the Naze board or the related clones. All the different methods will work in the same way.
The AlienWii32 F3 board needs to be flashed via the USB port in DFU mode. Flashing via the Cleanflight GUI is not possible yet. The DFU mode can be activated via setting the BOOT0 jumper during power on of the board. The second method is to connect with an terminal program (i.e. Putty) to the board and enter the character "R" immediately after connecting. Details about the flashing process can be found in the related section of the Sparky documentation. The BOOT0 jumper should be removed and the board needs to be repowerd after firmware flashing. Please be aware, during reboot of the AlienWii F3 board, the GUI will disconnect and an manual reconnect is required.
\ No newline at end of file
The AlienWii32 F3 board needs to be flashed via the USB port in DFU mode. Flashing via the Cleanflight GUI is not possible yet. The DFU mode can be activated via setting the BOOT0 jumper during power on of the board. The second method is to connect with an terminal program (i.e. Putty) to the board and enter the character "R" immediately after connecting. Details about the flashing process can be found in the related section of the [Sparky](Board - Sparky.md) documentation. The BOOT0 jumper should be removed and the board needs to be repowerd after firmware flashing. Please be aware, during reboot of the AlienWii F3 board, the GUI will disconnect and an manual reconnect is required.
\ No newline at end of file
Markdown is supported
0% or .
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment