Commit 57a5942e authored by ZhengNingwei's avatar ZhengNingwei
Browse files

Add new target DALRCF722DUAL and add DALRCF405 board description

Add new target DALRCF722DUAL and add DALRCF405 board description to development branch
parent 38c0caa1
# Board - DALRCF405
The DALRCF405 described here:
http://www.dalrcmodel.com/DALRC/plus/view.php?aid=184
This board use the STM32F405RGT6 microcontroller and have the following features:
* 1024K bytes of flash memory,192K bytes RAM,168 MHz CPU/210 DMIPS
* The 16M byte SPI flash for data logging
* USB VCP and boot select button on board(for DFU)
* Stable voltage regulation,9V/2A DCDC BEC for VTX/camera etc.And could select 5v/9v
* Serial LED interface(LED_STRIP)
* VBAT/CURR/RSSI sensors input
* Suppose IRC Tramp/smart audio/FPV Camera Control/FPORT/telemetry
* Supports SBus, Spektrum1024/2048, PPM. No external inverters required (built-in).
* Supports I2C device extend(baro/compass/OLED etc)
* Supports GPS
### Uarts
| Value | Identifier | RX | TX | Notes |
| ----- | ------------ | -----| -----| ------------------------------------------------------------------------------------------- |
| 1 | USART1 | PB7 | PA9 | PB7 FOR SBUS IN(inverter build in) |
| 2 | USART2 | PA3 | PA2 | PAD USE FOR TRAMP/smart audio |
| 3 | USART3 | PB11 | PB10| USE FOR GPS |
| 4 | USART4 | PA1 | PA0 | PA0 FOR RSSI/FPORT/TEL etc |
| 5 | USART5 | PD2 | PC12| PAD |
### I2C with GPS port together.Use for BARO or compass etc
| Value | Identifier | function | pin | Notes |
| ----- | ------------ | ---------| -------| ------------------------------------------------------------------------------------- |
| 1 | I2C1 | SDA | PB9 | with GPS outlet
| 2 | I2C1 | SCL | PB8 | with GPS outlet
### Buzzer/LED output
| Value | Identifier | function | pin | Notes |
| ----- | ------------ | ---------| -------| ------------------------------------------------------------------------------------- |
| 1 | LED0 | LED | PC14 |
| 2 | BEEPER | BEE | PC13 |
### VBAT input with 1/10 divider ratio,Current signal input,Analog/digit RSSI input
| Value | Identifier | function | pin | Notes |
| ----- | ------------ | ----------| ------| ------------------------------------------------------------------------------------- |
| 1 | ADC1 | VBAT | PC2 | DMA2_Stream0
| 2 | ADC1 | CURR | PC1 | DMA2_Stream0
| 3 | ADC1 | RSSI | PA0 | DMA2_Stream0
| 4 | ADC1 | extend | PC0 | DMA2_Stream0 extend for other senser(PAD)
### 8 Outputs, 1 PPM input
| Value | Identifier | function | pin | Notes |
| ----- | ------------ | ----------| ------| ------------------------------------------------------------------------------------- |
| 1 | TIM12_CH2 | PPM | PB15 | PPM
| 2 | TIM3_CH3 | OUPUT1 | PB0 | DMA1_Stream7
| 3 | TIM8_CH1 | OUPUT2 | PC6 | DMA2_Stream2
| 4 | TIM1_CH3 | OUPUT3 | PA10 | DMA2_Stream6
| 5 | TIM1_CH1 | OUPUT4 | PA8 | DMA2_Stream1
| 6 | TIM8_CH3 | OUPUT5 | PC8 | DMA2_Stream4
| 7 | TIM3_CH4 | OUPUT6 | PB1 | DMA1_Stream2
| 8 | TIM3_CH2 | OUPUT7 | PC7 | DMA1_Stream5
| 9 | TIM8_CH4 | OUPUT8 | PC9 | DMA2_Stream7
| 10 | TIM4_CH1 | PWM | PB6 | DMA1_Stream0 LED_STRIP
| 11 | TIM2_CH1 | PWM | PA5 | FPV Camera Control(FCAM)
### Gyro & ACC ,suppose ICM20689/MPU6000
| Value | Identifier | function | pin | Notes |
| ----- | ------------ | ---------| -------| ------------------------------------------------------------------------------------- |
| 1 | SPI1 | SCK | PB3 |
| 2 | SPI1 | MISO | PA6 |
| 3 | SPI1 | MOSI | PA7 |
| 4 | SPI1 | CS | PC4 |
### OSD MAX7456
| Value | Identifier | function | pin | Notes |
| ----- | ------------ | ---------| -------| ------------------------------------------------------------------------------------- |
| 1 | SPI3 | SCK | PC10 |
| 2 | SPI3 | MISO | PC11 |
| 3 | SPI3 | MOSI | PB5 |
| 4 | SPI3 | CS | PA15 |
### 16Mbyte flash
| Value | Identifier | function | pin | Notes |
| ----- | ------------ | ---------| -------| ------------------------------------------------------------------------------------- |
| 1 | SPI2 | SCK | PB13 |
| 2 | SPI2 | MISO | PB14 |
| 3 | SPI2 | MOSI | PC3 |
| 4 | SPI2 | CS | PB12 |
### SWD
| Pin | Function | Notes |
| --- | -------------- | -------------------------------------------- |
| 1 | SWCLK | PAD |
| 2 | Ground | PAD |
| 3 | SWDIO | PAD |
| 4 | 3V3 | PAD |
###Designers
* ZhengNyway(nyway@vip.qq.com) FROM DALRC
# Board - DALRCF722DUAL
The DALRCF722DUAL described here:
http://www.dalrcmodel.com/DALRC/plus/view.php?aid=188
This board use the STM32F722RET6 microcontroller and have the following features:
* High-performance and DSP with FPU, ARM Cortex-M7 MCU with 512 Kbytes Flash
* 216 MHz CPU,462 DMIPS/2.14 DMIPS/MHz (Dhrystone 2.1) and DSP instructions, Art Accelerator, L1 cache, SDRAM
* DUAL gyro MPU6000 and ICM20602,could choose mpu6000,more stable and smooth.Or choose ICM20602,higher rate(32K/32K).Choose on CLI mode,experience different feature gyro on same board
* OSD on board
* The 16M byte SPI flash on board for data logging
* USB VCP and boot select button on board(for DFU)
* Stable voltage regulation,DUAL BEC 5v/2.5A and 10v/2A for VTX/camera etc.And could select 5v/10v with pad
* Serial LED interface(LED_STRIP)
* VBAT/CURR/RSSI sensors input
* Suppose IRC Tramp/smart audio/FPV Camera Control/FPORT/telemetry
* Supports SBus(built-in inverters), Spektrum1024/2048, PPM
* Supports I2C device extend(baro/compass/OLED etc)(socket)
* Supports GPS (socket)
### All uarts have pad on board
| Value | Identifier | RX | TX | Notes |
| ----- | ------------ | -----| -----| ------------------------------------------------------------------------------------------- |
| 1 | USART1 | PB7 | PB6 | PB7 FOR SBUS IN(inverter build in)/PPM |
| 2 | USART2 | PA3 | PA2 | PAD USE FOR TRAMP/smart audio |
| 3 | USART3 | PC11 | PC10| USE FOR GPS |
| 4 | USART4 | PA1 | PA0 | PA0 FOR RSSI/FPORT/TEL etc |
| 5 | USART5 | PD2 | PC12| PAD |
### I2C with GPS port together.Use for BARO or compass etc
| Value | Identifier | function | pin | Notes |
| ----- | ------------ | ---------| -------| ------------------------------------------------------------------------------------- |
| 1 | I2C1 | SDA | PB9 |
| 2 | I2C1 | SCL | PB8 |
### Buzzer/LED output
| Value | Identifier | function | pin | Notes |
| ----- | ------------ | ---------| -------| ------------------------------------------------------------------------------------- |
| 1 | LED0 | LED | PC14 |On board
| 2 | BEEPER | BEE | PC13 |Pad
### VBAT input with 1/10 divider ratio,Current signal input,Analog/digit RSSI input
| Value | Identifier | function | pin | Notes |
| ----- | ------------ | ----------| ------| ------------------------------------------------------------------------------------- |
| 1 | ADC1 | VBAT | PC1 |
| 2 | ADC1 | CURR | PC0 |
| 3 | ADC1 | RSSI | PA0 |
### 8 Outputs
| Value | Identifier | function | pin | Notes |
| ----- | ------------ | ----------| ------| ------------------------------------------------------------------------------------- |
| 1 | TIM4_CH2 | PPM | PB7 | PPM
| 2 | TIM8_CH1 | OUPUT1 | PC6 | DMA
| 3 | TIM8_CH2 | OUPUT2 | PC7 | DMA
| 4 | TIM8_CH3 | OUPUT3 | PC8 | DMA
| 5 | TIM8_CH4 | OUPUT4 | PC9 | DMA
| 6 | TIM1_CH1 | OUPUT5 | PA8 | DMA
| 7 | TIM1_CH2 | OUPUT6 | PA9 | DMA
| 8 | TIM1_CH3 | OUPUT7 | PA10 | DMA NO PAD
| 9 | TIM2_CH4 | OUPUT8 | PB11 | NO PAD
| 10 | TIM2_CH1 | PWM | PA15 | DMA LED_STRIP
| 11 | TIM3_CH4 | PWM | PB1 | FPV Camera Control(FCAM)
### Gyro & ACC ,support ICM20602 and MPU6000
| Value | Identifier | function | pin | Notes |
| ----- | ------------ | ---------| -------| ------------------------------------------------------------------------------------- |
| 1 | SPI1 | SCK | PA5 | MPU6000 & ICM20602
| 2 | SPI1 | MISO | PA6 | MPU6000 & ICM20602
| 3 | SPI1 | MOSI | PA7 | MPU6000 & ICM20602
| 4 | SPI1 | CS1 | PB0 | MPU6000
| 5 | SPI1 | CS2 | PA4 | ICM20602
| 6 | SPI1 | INT1 | PB10 | MPU6000
| 7 | SPI1 | INT2 | PC4 | ICM20602
### OSD MAX7456
| Value | Identifier | function | pin | Notes |
| ----- | ------------ | ---------| -------| ------------------------------------------------------------------------------------- |
| 1 | SPI2 | SCK | PB13 |
| 2 | SPI2 | MISO | PB14 |
| 3 | SPI2 | MOSI | PB15 |
| 4 | SPI2 | CS | PB12 |
### 16Mbyte flash
| Value | Identifier | function | pin | Notes |
| ----- | ------------ | ---------| -------| ------------------------------------------------------------------------------------- |
| 1 | SPI3 | SCK | PB3 |
| 2 | SPI3 | MISO | PB4 |
| 3 | SPI3 | MOSI | PB4 |
| 4 | SPI3 | CS | PB2 |
### SWD
| Pin | Function | Notes |
| --- | -------------- | -------------------------------------------- |
| 1 | SWCLK | PAD |
| 2 | Ground | PAD |
| 3 | SWDIO | PAD |
| 4 | 3V3 | PAD |
###Designers
* ZhengNyway(nyway@vip.qq.com) FROM DALRC
/*
* This file is part of Cleanflight.
*
* Cleanflight is free software: you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation, either version 3 of the License, or
* (at your option) any later version.
*
* Cleanflight is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with Cleanflight. If not, see <http://www.gnu.org/licenses/>.
*/
#include <stdbool.h>
#include <stdint.h>
#include "platform.h"
#include "drivers/io_impl.h"
#ifdef USE_HARDWARE_PREBOOT_SETUP
void initialisePreBootHardware(void)
{
//DALRC F722 have dual GYRO:mpu6000 and icm20602,they use same SPI but different CS pin.Just use mpu6000 for INAV.
//So set icm20602 CS pin high to block icm20602 SPI .
IOInit(DEFIO_IO(PA4), OWNER_SYSTEM, RESOURCE_OUTPUT, 0);
IOConfigGPIO(DEFIO_IO(PA4), IOCFG_OUT_PP);
IOHi(DEFIO_IO(PA4));
}
#endif
/*
* This file is part of Cleanflight.
*
* Cleanflight is free software: you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation, either version 3 of the License, or
* (at your option) any later version.
*
* Cleanflight is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with Cleanflight. If not, see <http://www.gnu.org/licenses/>.
*/
#include <stdint.h>
#include "platform.h"
#include "drivers/bus.h"
#include "drivers/io.h"
#include "drivers/pwm_mapping.h"
#include "drivers/timer.h"
#define TIM_EN TIMER_OUTPUT_ENABLED
#define TIM_EN_N TIMER_OUTPUT_ENABLED | TIMER_OUTPUT_N_CHANNEL
const timerHardware_t timerHardware[] = {
DEF_TIM(TIM4, CH2, PB7, TIM_USE_PPM ,0, 0),
DEF_TIM(TIM8, CH1, PC6, TIM_USE_MC_MOTOR | TIM_USE_FW_MOTOR,0,0), //S1 DMA2_ST2 T8CH1
DEF_TIM(TIM8, CH2, PC7, TIM_USE_MC_MOTOR | TIM_USE_FW_SERVO,0,0), //S2 DMA2_ST3 T8CH2
DEF_TIM(TIM8, CH3, PC8, TIM_USE_MC_MOTOR | TIM_USE_FW_SERVO,0,0), //S3 DMA2_ST4 T8CH3
DEF_TIM(TIM8, CH4, PC9, TIM_USE_MC_MOTOR | TIM_USE_FW_SERVO,0,0), //S4 DMA2_ST7 T8CH4
DEF_TIM(TIM1, CH1, PA8, TIM_USE_MC_MOTOR | TIM_USE_FW_MOTOR,0,0), //S5 DMA2_ST1 T1CH1
DEF_TIM(TIM1, CH2, PA9, TIM_USE_MC_MOTOR | TIM_USE_FW_SERVO,0,0), //S6 DMA2_ST6 T1CH2
DEF_TIM(TIM2, CH1, PA15,TIM_USE_LED,0,0), //2812 STRIP DMA1_ST5
};
const int timerHardwareCount = sizeof(timerHardware) / sizeof(timerHardware[0]);
/*
* This file is part of Cleanflight.
*
* Cleanflight is free software: you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation, either version 3 of the License, or
* (at your option) any later version.
*
* Cleanflight is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with Cleanflight. If not, see <http://www.gnu.org/licenses/>.
*/
#pragma once
#define TARGET_BOARD_IDENTIFIER "DLF7"
#define USBD_PRODUCT_STRING "DALRCF722DUAL"
#define USE_HARDWARE_PREBOOT_SETUP
#define LED0 PC14
#define BEEPER PC13
#define BEEPER_INVERTED
#define USE_GYRO
#define USE_ACC
// MPU6000
#define MPU6000_CS_PIN PB0
#define MPU6000_SPI_BUS BUS_SPI1
#define USE_GYRO_MPU6000
#define GYRO_MPU6000_ALIGN CW180_DEG
#define USE_ACC_MPU6000
#define ACC_MPU6000_ALIGN CW180_DEG
#define USE_EXTI
#define GYRO_INT_EXTI PB10
#define USE_MPU_DATA_READY_SIGNAL
#define USE_VCP
#define USE_UART1
#define UART1_TX_PIN PB6
#define UART1_RX_PIN PB7
#define USE_UART2
#define UART2_TX_PIN PA2
#define UART2_RX_PIN PA3
#define USE_UART3
#define UART3_TX_PIN PC10
#define UART3_RX_PIN PC11
#define USE_UART4
#define UART4_TX_PIN PA0
#define UART4_RX_PIN PA1
#define USE_UART5
#define UART5_TX_PIN PC12
#define UART5_RX_PIN PD2
#define SERIAL_PORT_COUNT 6
#define USE_I2C
#define USE_I2C_DEVICE_1
#define I2C1_SCL PB8
#define I2C1_SDA PB9
#define USE_BARO
#define BARO_I2C_BUS BUS_I2C1
#define USE_BARO_BMP280
#define USE_BARO_MS5611
#define USE_BARO_BMP085
#define USE_MAG
#define MAG_I2C_BUS BUS_I2C1
#define USE_MAG_HMC5883
#define USE_MAG_QMC5883
#define USE_MAG_IST8310
#define USE_MAG_IST8308
#define USE_MAG_MAG3110
#define USE_MAG_LIS3MDL
#define USE_PITOT_MS4525
#define PITOT_I2C_BUS BUS_I2C1
#define USE_SPI
#define USE_SPI_DEVICE_1
#define SPI1_SCK_PIN PA5
#define SPI1_MISO_PIN PA6
#define SPI1_MOSI_PIN PA7
#define USE_SPI_DEVICE_2
#define SPI2_NSS_PIN PB12
#define SPI2_SCK_PIN PB13
#define SPI2_MISO_PIN PB14
#define SPI2_MOSI_PIN PB15
#define USE_SPI_DEVICE_3
#define SPI3_NSS_PIN NONE
#define SPI3_SCK_PIN PB3
#define SPI3_MISO_PIN PB4
#define SPI3_MOSI_PIN PB5
#define USE_OSD
#define USE_MAX7456
#define MAX7456_SPI_BUS BUS_SPI2
#define MAX7456_CS_PIN SPI2_NSS_PIN
#define ENABLE_BLACKBOX_LOGGING_ON_SPIFLASH_BY_DEFAULT
#define M25P16_CS_PIN PB2
#define M25P16_SPI_BUS BUS_SPI3
#define USE_FLASHFS
#define USE_FLASH_M25P16
#define USE_ADC
#define ADC_CHANNEL_1_PIN PC0
#define ADC_CHANNEL_2_PIN PC1
#define ADC_CHANNEL_3_PIN PA0
#define CURRENT_METER_ADC_CHANNEL ADC_CHN_1
#define VBAT_ADC_CHANNEL ADC_CHN_2
#define RSSI_ADC_CHANNEL ADC_CHN_3
#define VBAT_SCALE_DEFAULT 1600
#define USE_LED_STRIP
#define WS2811_PIN PA15
#define WS2811_DMA_HANDLER_IDENTIFER DMA1_ST5_HANDLER
#define WS2811_DMA_STREAM DMA1_Stream5
#define WS2811_DMA_CHANNEL DMA_CHANNEL_3
#define DEFAULT_FEATURES (FEATURE_VBAT | FEATURE_OSD )
#define DEFAULT_RX_TYPE RX_TYPE_SERIAL
#define SERIALRX_PROVIDER SERIALRX_SBUS
#define SERIALRX_UART SERIAL_PORT_USART1
#define USE_SERIAL_4WAY_BLHELI_INTERFACE
#define MAX_PWM_OUTPUT_PORTS 6
#define TARGET_IO_PORTA 0xffff
#define TARGET_IO_PORTB 0xffff
#define TARGET_IO_PORTC 0xffff
#define TARGET_IO_PORTD (BIT(2))
F7X2RE_TARGETS += $(TARGET)
FEATURES += VCP ONBOARDFLASH
TARGET_SRC = \
drivers/accgyro/accgyro_mpu.c \
drivers/accgyro/accgyro_mpu6000.c \
drivers/barometer/barometer_bmp085.c \
drivers/barometer/barometer_bmp280.c \
drivers/barometer/barometer_ms56xx.c \
drivers/compass/compass_hmc5883l.c \
drivers/compass/compass_qmc5883l.c \
drivers/compass/compass_ist8310.c \
drivers/compass/compass_ist8308.c \
drivers/compass/compass_mag3110.c \
drivers/compass/compass_lis3mdl.c \
drivers/light_ws2811strip.c \
drivers/max7456.c \
drivers/pitotmeter_ms4525.c \
drivers/pitotmeter_adc.c \
Markdown is supported
0% or .
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment